Titan Vault™ Mechanical Lock Programming — Quick Guide

Set Your Code
Choose a combination using single presses, simultaneous presses, or both. Use multiple buttons for better security.

Key Rules

• Each button can be used only once

• No repeating the same button

• Multiple buttons can be pressed at the same time

Before Locking
⚠️ Do NOT lock the safe until you confirm:

• The code is programmed correctly

• Lock opens smoothly

• Code works consistently over several tries

Pro Tip
Mix single and simultaneous presses for a stronger, less predictable code.

Titan Vault Combination Change Instruction.

Titan Vault Recovery of Zero Combination.

Troubleshooting: Lock Set to Zero Combination

Symptom / Problem:
Turning the exterior control knob clockwise retracts the latch even when no buttons are pressed.

Cause:
The lock has been set to a zero combination, likely due to an incorrect combination change procedure.

Solution:
Follow the standard steps for setting a new combination, but skip Step 2. Enter your desired new combination, then turn the knob clockwise to set it.

Be sure to record your new code in the correct sequence in your owner’s manual. Practice entering the combination—ideally with your eyes closed—to ensure you can operate it reliably.